Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2010LIBERTY 2WD V6-3.7LREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONS
2010 Jeep Liberty 2WD V6-3.7L
System Specifications
2010 Jeep Liberty 2WD V6-3.7LSECTION System Specifications
AUTOMATIC TRANSMISSION FLUID CAPACITY
NAG1 Transmission
Service Fill 5.0 L (5.3 quarts)
Overhaul Fill * 7.7 L (8.1 quarts)
42RLE Transmission
Service Fill 3.8 L (4.0 quarts)
Overhaul Fill * 8.3 L (8.8 quarts)
* Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
NAG1 Transmission
Service Fill 5.0 L (5.3 quarts)
Overhaul Fill * 7.7 L (8.1 quarts)
42RLE Transmission
Service Fill 3.8 L (4.0 quarts)
Overhaul Fill * 8.3 L (8.8 quarts)
* Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.