Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2009COMPASS LIMITED, EDG, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEMFUEL INJECTION, GASSPECIFICATIONSTORQUE
2009 Jeep Compass Limited, EDG, Standard
Fuel Injection, Gas: Specifications: Torque
2009 Jeep Compass Limited, EDG, StandardSECTION Torque
TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accelerator Pedal Nut | 16 | 12 | - |
| Battery Negative Cable Nut | 5 | - | 45 |
| Clean Air Hose Clamps 2.0, 2.4L Engines | 4 | - | 35 |
| Crankshaft Position Sensor Bolt | 9 | - | 79.5 |
| Fuel Rail Bolts 2.0, 2.4L Engine | 27 | 20 | - |
| Manifold Tune Valve Bolts | 6 | - | 53 |
| MAP Sensor Bolt | 4.5 | - | 40 |
| Oxygen Sensor | 41 | 30 | - |
| Throttle Body Bolts 2.0, 2.4L Engines | 7.5 | - | 65 |
| Throttle Body Bracket Bolt 2.0, 2.4L Engines | 25 | 18 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.