Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2009 Jeep Compass Limited, EDG, StandardFACTORY OEM SERVICE PROCEDURE

Step-By-Step Instructions

Check PCM VIN

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Check PCM VIN" and follow the on screen instructions.
When complete, select "Finish"

Diesel Particulate Filter (Used) Learning

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Diesel Particulate Filter (Used) Learning" and follow the on screen instructions.
When complete, select "Finish"

ECU Replacement with Value Transfer

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "ECU Replacement with Value Transfer" and follow the on screen instructions.
When complete, select "Finish"

ECU Replacement without Value Transfer

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "ECU Replacement without Value Transfer" and follow the on screen instructions.
When complete, select "Finish"

Enable / Disable Vehicle Features

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Enable / Disable Vehicle Features" and follow the on screen instructions.
When complete, select "Finish"

Exhaust Throttle Plate Adaptive Learn Position

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Exhaust Throttle Plate Adaptive Learn Position" and follow the on screen instructions.
When complete, select "Finish"

Fuel Mean Value Adaptation Initialization

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Fuel Mean Value Adaptation Initialization" and follow the on screen instructions.
When complete, select "Finish"

IMA Rapid Calibration

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "IMA Rapid Calibration Test" and follow the on screen instructions.
When complete, select "Finish"

Initialize EGS

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Initialize EGS" and follow the on screen instructions.
When complete, select "Finish"

Injector Quantity Adjustment

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Injector Quantity Adjustment" and follow the on screen instructions.
When complete, select "Finish"

Mobile DeSoot - NO Minimum Required Soot Load

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Mobile DeSoot - NO Minimum Required Soot Load" and follow the on screen instructions.
When complete, select "Finish"

NOx Catalyst (New) Initialization

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "NOx Catalyst (New) Initialization" and follow the on screen instructions.
When complete, select "Finish"

PCM Replaced

The vehicle pin (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:

The original selling invoice
DealerCONNECT > Parts > Key Codes
Contacting the District Manager.

From the "Home" screen, select "ECU View"

Select "WCM"
Select "Misc. Functions"
Select "PCM Replaced" and follow the on screen instructions.
When complete, select "Finish"

Program Variant Code

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Program Variant Code" and follow the on screen instructions.
When complete, select "Finish"

Quicklearn

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Quicklearn" and follow the on screen instructions.
When complete, select "Finish"

Reset Regenerative Filter Timers

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Reset Regenerative Filter Times" and follow the on screen instructions.
When complete, select "Finish"

Set Oil Dilution Mass Value

From the "Home" screen, select "ECU View"

Select "PCM"
Select "Misc. Functions"
Select "Set Oil Dilution Mass Value" and follow the on screen instructions.
When complete, select "Finish"

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty

Get a Free Quote

No obligation. See pricing before you book.