Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Jeep Compass 4WD L4-2.0LFACTORY OEM SERVICE PROCEDURE
Oil Pump, Engine
OIL PUMP
NOTE: Use a three step procedure when tightening BSM mounting bolts.
For new 180 mm bolts, use the following torque specifications:
Tighten new 180 mm BSM mounting bolts as follows:
Tighten to 15 Nm (11 ft. lbs.) in the sequence shown.
Tighten to 33 Nm (24 ft. lbs.) in the sequence shown.
Rotate bolts an additional 90° in the sequence shown.
For 185 mm bolts, use the following torque specifications:
Tighten 185 mm BSM mounting bolts as follows:
Tighten to 15 Nm (11 ft. lbs.) in the sequence shown.
Tighten to 29 Nm (22 ft. lbs.) in the sequence shown.
Rotate bolts an additional 90° in the sequence shown.
NOTE: Use a three step procedure when tightening BSM mounting bolts.
For new 180 mm bolts, use the following torque specifications:
Tighten new 180 mm BSM mounting bolts as follows:
Tighten to 15 Nm (11 ft. lbs.) in the sequence shown.
Tighten to 33 Nm (24 ft. lbs.) in the sequence shown.
Rotate bolts an additional 90° in the sequence shown.
For 185 mm bolts, use the following torque specifications:
Tighten 185 mm BSM mounting bolts as follows:
Tighten to 15 Nm (11 ft. lbs.) in the sequence shown.
Tighten to 29 Nm (22 ft. lbs.) in the sequence shown.
Rotate bolts an additional 90° in the sequence shown.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.