Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSJEEP2008LIBERTY 4WD V6-3.7LREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSSTEERING MOUNTED CONTROLS COMMUNICATION MODULE
2008 Jeep Liberty 4WD V6-3.7L
Steering Mounted Controls Communication Module
2008 Jeep Liberty 4WD V6-3.7LSECTION Steering Mounted Controls Communication Module
Component ID: 210
Component : MODULE-STEERING CONTROL
Connector:
Name : MODULE-STEERING CONTROL C1
Color :
# of pins : 4
Pin Circuit Description
1 Z910 18BK/BR GROUND
2 A412 18RD FUSED B(+)
3 D506 20WT/DG LIN BUS
4 F943 18PK/LG FUSED IGNITION SWITCH OUTPUT (RUN-START)
Component Location - 34
Component Location - 36
Component Location - 37
Connector:
Name : MODULE-STEERING CONTROL C2
Color : NATURAL
# of pins : 6
Pin Circuit Description
1 Z910 18BK GROUND
Pin Circuit Description
1 X20 22GY/WT RADIO CONTROL MUX
2 D506 20WT/DG LIN BUS
2 Y13 20VT/YL SIGNAL RETURN
3 A909 18RD FUSED B(+)
3 X3 22DG/VT HORN SWITCH SENSE
4 V72 22OR/VT S/C SIGNAL 2
5 V937 22VT/BR S/C RETURN
6 V71 22VT/OR S/C SIGNAL 1
Component Location - 34
Component Location - 36
Component Location - 37
Connector:
Name : MODULE-STEERING CONTROL C4
Color : WHITE
# of pins : 4
Pin Circuit Description
1 R63 20LG/WT DRIVER SQUIB 2 LINE 1
2 R61 20LG/VT DRIVER SQUIB 2 LINE 2
3 R45 20LG/OR DRIVER SQUIB 1 LINE 1
4 R43 20LG/BR DRIVER SQUIB 1 LINE 2
Component Location - 34
Component Location - 36
Component Location - 37
Connector:
Name : MODULE-STEERING CONTROL C5
Color : WHITE
# of pins : 6
Pin Circuit Description
1 - -
2 Y13 20VT/YL SIGNAL RETURN
3 X3 20DB HORN SWITCH SENSE
4 V72 20PK S/C SIGNAL 2
5 V71 20VT S/C SIGNAL 1
6 V937 20YL S/C RETURN
Component Location - 34
Component Location - 36
Component Location - 37
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.