Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008LIBERTY 4WD V6-3.7LREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSALARM MODULE, (VEHICLE ANTITHEFT)
2008 Jeep Liberty 4WD V6-3.7L
Alarm Module, (Vehicle Antitheft)
2008 Jeep Liberty 4WD V6-3.7LSECTION Alarm Module, (Vehicle Antitheft)
Component ID: 202
Component : MODULE-INTRUSION TRANSCEIVER
Connector:
Name : MODULE-INTRUSION TRANSCEIVER
Color : BLACK
# of pins : 12
Pin Circuit Description
1 A412 18RD FUSED B(+)
2 - -
3 A645 20RD/VT INTRUSION TRANSMITTER SENSOR SIGNAL
4 G460 20DG/VT INTRUSION RECEIVER SENSOR SIGNAL
5 D96 18WT/LB SIREN SIGNAL CONTROL
6 D265 20WT/GY CAN INTERIOR BUS (+)
6 D265 20WT/OR CAN INTERIOR BUS (+)
7 Z919 20BK/WT GROUND
8 - -
9 G945 20VT/DG INTRUSION TRANSMITTER SENSOR GROUND
10 G946 20LG/VT INTRUSION RECEIVER SENSOR GROUND
11 - -
12 D264 20WT/OR CAN INTERIOR BUS (-)
12 D264 20WT CAN INTERIOR BUS (-)
Component Location - 47
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.