Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMPASS 2WD L4-2.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COMPONENTSSYSTEM SPECIFICATIONS
2008 Jeep Compass 2WD L4-2.4L
System Specifications
2008 Jeep Compass 2WD L4-2.4LSECTION System Specifications
Timing Chain Tensioner
Timing chain guide 12 Nm (105 in. lbs.)
Timing chain pivot guide 12 Nm (105 in. lbs.)
Timing chain tensioner 12 Nm (105 in. lbs.)
Timing Chain Cover
M6 bolts 9 Nm (80 in.lbs.)
M8 bolts 26 Nm (230 in.lbs.)
Crankshaft Damper
Crankshaft Damper Bolt 210 Nm (155 ft.lbs.)
Timing chain guide 12 Nm (105 in. lbs.)
Timing chain pivot guide 12 Nm (105 in. lbs.)
Timing chain tensioner 12 Nm (105 in. lbs.)
Timing Chain Cover
M6 bolts 9 Nm (80 in.lbs.)
M8 bolts 26 Nm (230 in.lbs.)
Crankshaft Damper
Crankshaft Damper Bolt 210 Nm (155 ft.lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.