SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMPASS 2WD L4-2.4LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSELECTRONIC THROTTLE CONTROL INDICATORDESCRIPTION AND OPERATIONDESCRIPTION
2008 Jeep Compass 2WD L4-2.4L

Description

2008 Jeep Compass 2WD L4-2.4LSECTION Description






DESCRIPTION





An Electronic Throttle Control (ETC) indicator is standard equipment on all instrument clusters. This indicator is located above the fuel gauge in the cluster overlay, to the left of the speedometer.

The ETC indicator consists of a stencil-like cutout of the International Control and Display Symbol icon for Electronic Throttle Control in the opaque layer of the instrument cluster overlay. The dark outer layer of the overlay prevents the indicator from being clearly visible when it is not illuminated. A red Light Emitting Diode (LED) behind the cutout in the opaque layer of the overlay causes the indicator to appear in red through the translucent outer layer of the overlay when it is illuminated from behind by the LED, which is soldered onto the instrument cluster electronic circuit board.

The ETC indicator is serviced as a unit with the instrument cluster.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.