SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2008COMMANDER 2WD V8-5.7LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYKEYLESS ENTRY MODULEDESCRIPTION AND OPERATIONDESCRIPTION
2008 Jeep Commander 2WD V8-5.7L

Description

2008 Jeep Commander 2WD V8-5.7LSECTION Description






DESCRIPTION





The functions and features of the Sentry Key Immobilizer Module (SKIM) (also known as the Sentry Key REmote Entry Module/SKREEM or the Wireless Control Module/WCM) are all integral to the Wireless Ignition Node (WIN) (1) in this vehicle. The WIN is the primary component of the Sentry Key Immobilizer System (SKIS). It includes the integral ignition switch and is also the receiver for the Remote Keyless Entry (RKE) system and the Tire Pressure Monitor (TPM) system. The WIN is located in the instrument panel, just to the right of the steering column. The remainder of the WIN including its mounting provisions and electrical connections are concealed within the instrument panel.

The WIN cannot be adjusted or repaired, but is flash update capable. If ineffective or damaged the entire WIN must be replaced. Removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.