Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Jeep Commander 2WD V8-5.7L VIN 2FACTORY OEM SERVICE PROCEDURE
Switch-Window/Door Lock-Driver
Component ID: 564
Component : SWITCH-WINDOW/DOOR LOCK-DRIVER
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER C1
Color :
# of pins : 8
Pin Description Circuit
1 FUSED RUN/ACCESSORY DELAY RELAY OUTPUT A929 16RD/DB
2 MASTER WINDOW SWITCH LEFT REAR (DOWN) Q611 16OR/GY
3 MASTER WINDOW SWITCH LEFT REAR (UP) Q411 16OR/WT
4 MASTER WINDOW SWITCH RIGHT REAR (DOWN) Q612 16OR/DB
5 WINDOW LOCK OUT SWITCH OUTPUT Q15 16OR/LB
6 GROUND Z911 16BK
7 - -
8 MASTER WINDOW SWITCH RIGHT REAR (UP) Q412 16OR/LB
Component Location - 65
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER C2
Color :
# of pins : 6
Pin Description Circuit
1 MASTER SWITCH LEFT FRONT WINDOW MUX Q221 20OR/DG
2 MASTER SWITCH RIGHT FRONT WINDOW MUX Q222 20OR/GY
3 LEFT DOOR LOCK SWITCH MUX G161 20VT/DG
3 RIGHT DOOR LOCK SWITCH MUX G160 20VT/LG
4 DRIVER EXPRESS WINDOW SWITCH RETURN Q994 20BK/BR
5 LEFT DOOR LOCK SWITCH RETURN G775 20OR/VT
5 RIGHT DOOR LOCK SWITCH RETURN G776 20VT/OR
6 - -
Component Location - 65
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
