Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Jeep Wrangler X, AutomaticFACTORY OEM SERVICE PROCEDURE
Fuel Injection: Specifications: Torque
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accelerator Pedal Bracket Mounting Nuts | 8.5 | - | 75 |
| Engine Coolant Temperature Sensor - 2.4L/4.0L | 11 | - | 96 |
| IAC Motor-To-Throttle Body Bolts - 2.4L/4.0L | 7 | - | 60 |
| Intake Manifold Air Temp. Sensor - 4.0L | 28 | 20 | - |
| MAP Sensor Mounting Screws - 2.4L/4.0L | 3 | - | 25 |
| Oxygen Sensor - 2.4L/4.0L | 30 | 22 | - |
| PCM Mounting Screws | 4 | - | 35 |
| Throttle Body Mounting Bolts - 2.4L/4.0L | 11 | - | 100 |
| Throttle Position Sensor Mounting Screws - 2.4L/4.0L | 7 | - | 60 |
| Vehicle Speed Sensor Mounting Bolt | 2.2 | - | 20 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.