Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Jeep Commander Base, 3.7 K, AWDFACTORY OEM SERVICE PROCEDURE
Fuel Delivery: Specifications: Torque
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accelerator Pedal Bracket Mounting | 12 | - | 105 |
| Accelerator Pedal Position Sensor Mounting Nuts - 5.7L | 3 | - | 30 |
| Crankshaft Position Sensor - 3.7L | 28 | 21 | - |
| Crankshaft Position Sensor - 4.7L | 28 | 21 | - |
| Crankshaft Position Sensor - 5.7L | 12 | - | 105 (+/-20) |
| Camshaft Position Sensor - 3.7L | 12 | - | 106 |
| Camshaft Position Sensor - 4.7L | 12 | - | 106 |
| Camshaft Position Sensor - 5.7L | 12 | 9 | 105 (+/-) 20 |
| Engine Coolant Temperature Sensor - 3.7L | 11 | - | 96 |
| Engine Coolant Temperature Sensor - 4.7L | 11 | - | 96 |
| Engine Coolant Temperature Sensor - 5.7L | 11 | - | 96 |
| Fuel Filler Hose Clamp | 3 | - | 30 |
| Fuel Filler Housing-to-Body Screws | 2 | - | 17 |
| Fuel Rail Mounting Bolts - 3.7L | 11 | - | 100 |
| Fuel Rail Mounting Bolts - 4.7L | 11 | - | 100 |
| Fuel Rail Mounting Bolts - 5.7L | 11 | - | 100 |
| Fuel Tank Mounting Bolts | 68 | 50 | - |
| IAC Motor Mounting Screws - 3.7L | 7 | - | 60 |
| IAC Motor Mounting Screws - 4.7L | 7 | - | 60 |
| NVLD Pump Mounting Bolt | 8.5 | - | 75 |
| Map Sensor Mounting Screws - 3.7L | 3 | - | 25 |
| Map Sensor Mounting Screws - 4.7L | 3 | - | 25 |
| PCM-to-Mounting Bracket Mounting Screws | 4 | - | 35 |
| Power Steering Pressure Switch - 3.7L | 14-22 | - | 124-195 |
| Power Steering Pressure Switch - 4.7L | 14-22 | - | 124-195 |
| TPS Mounting Screws - 3.7L | 7 | - | 60 |
| TPS Mounting Screws - 4.7L | 7 | - | 60 |
| Throttle Body Mounting Bolts - 3.7L | 11 | - | 100 |
| Throttle Body Mounting Bolts - 4.7L | 12 | - | 105 |
| Throttle Body Mounting Bolts - 5.7L | 12 | - | 105 |
| Oxygen Sensors | 30 | 22 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
