2005 Jeep Wrangler X, AutomaticFACTORY OEM SERVICE PROCEDURE

DRBIII® Error Messages And Blank Screen: Notes

Under normal operation, the DRBIII® will display one of only two error messages:

  • User-Requested WARM Boot by pressing MORE and NO at the same time.
    Fig 1: DRBIII® Screen Functions Reference
    G04550534Courtesy of DAIMLERCHRYSLER CORP.

    or User Requested COLD Boot by pressing MORE YES at the same time.

    Fig 2: DRBIII® Screen Functions Reference
    G04550535Courtesy of DAIMLERCHRYSLER CORP.

    If the DRBIII® should display any other error message, record the entire display and call the Star Center.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.