Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Jeep TJ (CANADA) L4-2.5LFACTORY OEM SERVICE PROCEDURE
Power Steering Fluid
During scheduled maintenance, check the power steering fluid level at the power steering reservoir.
Before removing the reservoir cap, wipe the outside of the cap and reservoir so that no dirt can fall into the reservoir.
Fluid level should be maintained at the proper level indicated on the side of the reservoir. If necessary, add fluid to restore to the proper indicated level.With a clean cloth, wipe any spilled fluid from all surfaces. See your authorized dealer for the correct power steering fluid for your vehicle.
Before removing the reservoir cap, wipe the outside of the cap and reservoir so that no dirt can fall into the reservoir.
Fluid level should be maintained at the proper level indicated on the side of the reservoir. If necessary, add fluid to restore to the proper indicated level.With a clean cloth, wipe any spilled fluid from all surfaces. See your authorized dealer for the correct power steering fluid for your vehicle.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.