Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Windows
All power windows can be raised or lowered from Driver's Door Module (DDM). Power window control for passenger's power windows can be operated from corresponding individual power window switches. DDM is equipped with express down feature for driver's door only. Depress driver's power window switch to second detent and driver's power window will automatically move to full open position even with power window switch released. DDM has a lockout switch that prevents power windows from being operated from any switch except driver's door. When lockout switch is pressed, individual door switch LEDs are also disabled. BCM accessory delay feature allows operation of power windows for 45 seconds after ignition is turned off. If a door is opened during the 45 second period, BCM will disable power window system.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.