2000 Jeep Cherokee Limited, 4D Utility, RWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 6.00 OZS. 0.17 L PAG 100 S
Air Cond Refrigerant 1.25 LBS. 0.56 KG R-134a For further details see "Air conditioner specification label". S
Automatic Transmission Fluid 4.0L Eng 8.25 QTS. 7.8 L Automatic Transmission Fluid DEXRON IIE or MERCON MOPAR DEXRON II can be used in emergency situations where MERCON fluid is not available. S
Brake Fluid N/A N/A DOT 3 Brake Fluid Fill to line on reservoir. S
Differential Gear Oil Front 3.00 PTS. 1.41 L API - GL-5, SAE 75W-90 Fuel Efficient Gear Oil Models with Class III Hitch Trailer Towing Pkg. use SAE 75W-140 Synthetic Gear Lubricant in the rear axle. Models equipped w/TRAC-LOK require an additive. S
Differential Gear Oil Rear,w/Chrysler Axle 4.40 PTS. 2.08 L API - GL-5, SAE 75W-90 Fuel Efficient Gear Oil Models with Class III Hitch Trailer Towing Pkg. use SAE 75W-140 Synthetic Gear Lubricant in the rear axle. Models equipped w/TRAC-LOK require an additive. S
Differential Gear Oil Rear,w/Dana Axle 3.40 PTS. 1.6 L API - GL-5, SAE 75W-90 Fuel Efficient Gear Oil Models with Class III Hitch Trailer Towing Pkg. use SAE 75W-140 Synthetic Gear Lubricant in the rear axle. Models equipped w/TRAC-LOK require an additive. S
Engine Coolant 12.00 QTS. 11.35 L 50/50 mixture of Ethylene Glycol Antifreeze and water Includes: 2.3 qts. for the engine coolant recovery tank. S
Engine Oil 6.00 QTS. 5.67 L API - SAE 10W-30 S
Fuel Tank 20.00 GALS. 75.7 L S
Power Steering Fluid N/A N/A Power Steering Fluid S
Transfer Case Fluid w/Command-Trac 2.20 PTS. 1.04 L Automatic Transmission Fluid DEXRON III or MERCON S
Transfer Case Fluid w/Select-Trac 2.85 PTS. 1.34 L Automatic Transmission Fluid DEXRON III or MERCON S
Windshield Washer Fluid N/A N/A Windshield Antifreeze Not radiator antifreeze. For further details see "Air conditioner specification label". S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.