2000 Jeep Cherokee Limited, 2D PickupFACTORY OEM SERVICE PROCEDURE

Fuel Pump

NOTE: Fuel pump performance refers to regulated fuel pressure and volume availability. Mechanical fuel pressure regulator is part of fuel pump module, and is not controlled by vacuum or PCM.
FUEL PUMP PERFORMANCE (1)

Application Pressure psi (kg/cm2 ) (2)Min. Vol. In 7 Sec.
All Models 44.2-54.2 (3.1-3.7) .5 Pt. (.25L)
(1) Fuel pressure is measured with engine idling.
(2) DO NOT operate fuel pump longer than 7 seconds when checking pump volume. Fuel pump module reservoir may run empty.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.