2000 Jeep Cherokee Classic, 2D PickupFACTORY OEM SERVICE PROCEDURE

Programming Blank Sentry Keys Using Scan Tool

  1. Once key blank is cut, insert key into ignition switch. Turn ignition on.
  2. Using scan tool, select THEFT ALARM, then SKIM. Select MISCELLANEOUS.
  3. Using scan tool, select PROGRAM NEW KEY.
  4. Enter 4-digit Personal Identification Number (PIN) code.
  5. When programming is completed, Sentry Key Immobilizer Module (SKIM) will exit SECURED ACCESS mode and display status of key. One of 5 different status messages may be displayed as follows:

    • PROGRAMMING SUCCESSFUL

      will be displayed if SKIM smart key programming succeeds.

    • LEARNED KEY IN IGNITION

      will be displayed if key in the ignition has already been programmed into vehicle's SKIM.

    • 8 KEYS ALREADY LEARNED, PROGRAMMING NOT DONE

      will be displayed if 8 keys have already been programmed into SKIM. If a new key needs to be added due to a lost or defective key, the ERASE ALL KEYS function has to be performed. Original 7 keys plus additional new key may then be reprogrammed into SKIM.

    • PROGRAMMING NOT ATTEMPTED

      will be displayed after an ERASE ALL KEYS function is executed.

    • PROGRAMING KEY FAILED

      will be displayed if further diagnosis is required.
  6. To program additional keys, turn ignition off. Remove current programmed key and insert next new blank key. Turn ignition switch to RUN position. Re-enter SECURED ACCESS mode function and go to step  1 .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.