Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1999CHEROKEE 2WD L4-2.5L VIN PREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BLOCK
1999 Jeep Cherokee 2WD L4-2.5L VIN P
Cylinder Block
1999 Jeep Cherokee 2WD L4-2.5L VIN PSECTION Cylinder Block
| Deck Height | 9.320 Inch (in) |
| Deck Clearance | 0.000 Inch (in) |
| Cylinder Bore Diameter-Standard | 3.8759 to 3.8775 Inch (in) |
| Cylinder Bore Diameter-Taper (Max.) | 0.001 Inch (in) |
| Cylinder Bore Diameter - Out-Of-Round (Max.) | 0.001 Inch (in) |
| Tappet Bore Diameter | 0.9055 to 0.9065 Inch (in) |
| Flatness Per 1 Inch | 0.001 Inch (in) |
| Flatness Per 6 Inches | 0.002 Inch (in) |
| Flatness Max. For Total Length | 0.008 Inch (in) |
| Main Bearing Bore Diameter | 2.691 to 2.692 Inch (in) |
| Cylinder Block Drain Plugs | 30 Foot Pound-Force (ft.lb) |
| Main Bearing Cap Bolts | 80 Foot Pound-Force (ft.lb) |
| Oil Galley Plug | 30 Foot Pound-Force (ft.lb) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.