Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Jeep Cherokee Country, 2D Utility, RWD, StandardFACTORY OEM SERVICE PROCEDURE
Electronic Inside Rear View Mirror
- Press ON button in to activate mirror. Cover forward facing sensor (located on passenger's side of mirror). shine light into rear facing sensor. Mirror should darken. Place gear selector in reverse. Mirror should return to normal. If mirror operates as specified, system is good and test is complete. If mirror does not operate as specified, go to next step.
- Check fuse No. 19 (15-amp) Unplug 3-pin connector (7-pin connector with sun roof) from front side of mirror. Ensure ignition is on. Check Yellow/Dark Green wire for battery voltage. If battery voltage exists, go to next step. If battery voltage does not exist, repair open Yellow/Dark Green wire between 3-pin connector and fuse No. 19.
- Check Black wire for continuity between 3-pin connector and ground. If continuity exists, go to next step. If continuity does not exist, repair open Black wire.
- Check Brown/Light Green wire for battery voltage. Move gear selector through all gear positions. Battery voltage should exist only when selector is in reverse. If battery voltage exists as specified, replace mirror and retest mirror system. If battery voltage does not exist as specified, repair open in Brown, Light Green wire.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.