Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Jeep Cherokee LimitedFACTORY OEM SERVICE PROCEDURE
Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | ||||||
|---|---|---|---|---|---|---|---|---|
| Cherokee & Comanche | ||||||||
| Camber (1) | 0 | -0.75 To 0.5 | ||||||
| Caster (1) | 6 | 5 To 9 | ||||||
| Toe-In (1) | 0 | -0.1 To 0.1 | ||||||
| Toe-In (2) | 0 | -0.05 To 0.05 | ||||||
| Toe-Out On Turns (1) | 33 | 33 | ||||||
| Wrangler | ||||||||
| Camber (1) | 0 | -0.5 To 0.5 | ||||||
| Caster (1) | ||||||||
| Manual Transmission | 8 | 6.5 To 9 | ||||||
| Automatic Transmission | 6.5 | 5.25 To 7.25 | ||||||
| Toe-In (1) | 0 | -0.24 To 0.24 | ||||||
| Toe-In (2) | 0 | -0.12 To 0.12 | ||||||
| Toe-Out On Turns (1) | 33 | 33 | ||||||
|
||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.