Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP1987CHEROKEE LIMITEDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMSPARK CONTROL SYSTEMTESTINGREVERSE DELAY VALVE
1987 Jeep Cherokee Limited
Reverse Delay Valve
1987 Jeep Cherokee LimitedSECTION Reverse Delay Valve
- Connect external vacuum source to port on White side of delay valve. Connect vacuum gauge to port on colored (non-White) side of valve.
- With elapsed time device in view and a constant 10 in. Hg vacuum applied, note time required for gauge pointer to move from 0-8 in. Hg.
- If valve fails to meet time limits, replace valve. If valve meets specifications, install with non-White side toward vacuum source.
REVERSE DELAY VALVE TIME LIMITS (1)
| Valve Color | Min. Time | Max. Time | ||
|---|---|---|---|---|
| White/Purple | 3.2 | 4.8 | ||
| White/Gray | 8 | 12 | ||
| White/Gold | 12 | 18 | ||
| White/Brown | 16 | 24 | ||
| White/Yellow | 80 | 120 | ||
| White/Red | 300 | 450 | ||
| White/Orange | 1.5 | 2.5 | ||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.