1986 Jeep Comanche Base, 2.8 W, 4WD, StandardFACTORY OEM SERVICE PROCEDURE

Towing (Recreational)

Fig 1: Front Towing Hookup (Typical 4WD)
G31358
  1. On CJ7, Cherokee, Comanche, Grand Wagoneer or Truck with the model 208 or 300 transfer case and automatic (manual) transmission, turn ignition switch to the "OFF" position to unlock the steering wheel.
  2. Shift automatic (manual) transmission into Park (gear) and transfer case into Neutral position. Place locking hubs in the LOCK" position to provide axle lubrication.
  3. On Grand Wagoneer or Truck with Select-Trac, shift the transmission into Neutral with the vehicle moving slowly (2-3 MPH). Using a firm, positive movement, shift the transfer case selector lever into Neutral.
  4. When the selector lever is in the Neutral position, both axles are disconnected from the drive train. This will permit the vehicle to be towed without removing the drive shafts.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.