2012 Jaguar XKR 2D ConvertibleFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 3.70 OZS. 0.1 L PAG 46 S
Air Cond Refrigerant 1.65 LBS. 0.74 KG HFC-134a S
Brake Fluid N/A N/A Shell DOT4 ESL S
Engine Coolant 10.55 QTS. 9.98 L 50% mixture antifreeze of water and spec WSS M97B44 (colored orange) Extended Life Coolant S
Engine Oil w/Filter 7.65 QTS. 7.23 L Castrol SLK Professional OE SAE 5W-20 meeting Specification: WSS M2C925-A In an emergency, if the oil is unavailable, the engine can be topped-up using a maximum of 2 US pints of 5W-20 oil meeting spec ILSACGF-4 API SM. S
Fuel Tank 18.80 GALS. 71.16 L S
Power Steering Fluid N/A N/A Pentosin CHF202 S
Windshield Washer Fluid 7.00 QTS. 6.62 L Windshield Wash with frost protection Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.