Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Jaguar XK 2D ConvertibleFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.70 OZS. | 0.1 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.54 LBS. | 0.69 KG | R-134a | S | |||
| Automatic Transmission Fluid | 10.70 QTS. | 10.12 L | SHELL M1375.4 | S | |||
| Brake Fluid | N/A | N/A | DOT 4 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 0.95 QTS. | 0.89 L | CASTROL SAF-XO 75W-90 | S | |||
| Engine Coolant | 10.00 QTS. | 9.46 L | WSS M97B44-D | Organic Acid Technology (OAT) type and must not be mixed with other types of coolant. | S | ||
| Engine Oil | 7.60 QTS. | 7.19 L | Castrol SLK Professional OE SAE 5W-20 meeting Specification: WSS M2C925-A | In an emergency, if the oil is unavailable, the engine can be topped-up using a maximum of 2 US pints of 5W-20 oil meeting spec ILSACGF-4 API SM. | S | ||
| Fuel Tank | N/A | N/A | S | ||||
| Power Steering Fluid | 1.00 QTS. | 0.94 L | MOBIL ATF meeting DEXRON III | Top up only. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windscreen Washer Fluid and clean water | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.