Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Jaguar XKR 2D ConvertibleFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.70 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.54 LBS. | 0.69 KG | R-134a | S | |||
| Automatic Transmission Fluid | 10.57 QTS. | 10 L | SHELL M1375.4 | Part No. C2C 8432. | S | ||
| Brake Fluid | N/A | N/A | SHELL ESL Super DOT 4 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 1.35 QTS. | 1.27 L | M2C 192A Synthetic Gear Oil | Part No. JLM 20771. | S | ||
| Engine Coolant | 12.15 QTS. | 11.49 L | 50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor | Specification: WSS M97B44-D. | S | ||
| Engine Oil | Initial Fill | 9.00 QTS. | 8.51 L | API - SAE 5W-30 | Specification: WSS-M2C913B. | S | |
| Engine Oil | Service Fill,w/Filter | 7.40 QTS. | 7 L | API - SAE 5W-30 | Specification: WSS-M2C913B. | S | |
| Fuel Tank | 19.80 GALS. | 74.95 L | S | ||||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid DEXRON III | S | |||
| Windshield Washer Fluid | N/A | N/A | Windscreen Washer Fluid and clean water | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
