Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Jaguar X-Type Base, 2.5 D, AutomaticFACTORY OEM SERVICE PROCEDURE
Acceleration Control
- Specifications
- General Procedures
- Description And Operation
- Diagnosis And Testing
- Acceleration Control
- Notes
- PINPOINT TEST G92527p1: DTC P1240, P1241, P1242
- PINPOINT TEST G92527p2: DTC P1122, P1123, P1215, P1216, P1344
- PINPOINT TEST G92527p3: DTC P0121, P0122, P0123
- G92527t8: CHECK THE POWER SUPPLY TO THE THROTTLE POSITION SENSOR
- G92527t9: CHECK THE THROTTLE POSITION SENSOR POWER SUPPLY CIRCUIT FOR OPEN CIRCUIT
- G92527t10: CHECK THE THROTTLE POSITION SENSOR POWER SUPPLY CIRCUIT FOR A SHORT TO GROUND
- G92527t11: CHECK THE THROTTLE POSITION SENSOR GROUND CIRCUIT
- G92527t12: CHECK THE THROTTLE POSITION SENSOR GROUND WIRE FOR OPEN CIRCUIT
- G92527t13: CHECK THE THROTTLE POSITION SENSOR
- G92527t14: CHECK CONTINUITY OF THE THROTTLE POSITION SENSOR OUTPUT CIRCUIT
- G92527t15: CHECK THE THROTTLE POSITION SENSOR OUTPUT CIRCUIT FOR A SHORT TO GROUND
- PINPOINT TEST G92527p4: DTC P1251, P1658, P1631, P1657
- G92527t16: CHECK THE THROTTLE MOTOR RELAY
- G92527t17: CHECK THE ECM POWER SUPPLY FROM THE THROTTLE MOTOR RELAY
- G92527t18: CHECK CONTINUITY OF THE ECM POWER SUPPLY WIRE FROM THE THROTTLE MOTOR RELAY
- G92527t19: CHECK FUSE 33 IN THE ENGINE COMPARTMENT FUSE BOX.
- G92527t20: CHECK THE THROTTLE MOTOR RELAY POWER SUPPLY CIRCUIT
- G92527t21: CHECK FUSE 33 FOR A SHORT TO GROUND
- G92527t22: CHECK FUSE 36 IN THE ENGINE COMPARTMENT FUSE BOX
- G92527t23: CHECK THE POWER SUPPLY CIRCUIT TO THE THROTTLE MOTOR RELAY COIL
- G92527t24: CHECK CONTINUITY OF THE POWER SUPPLY CIRCUIT TO THE THROTTLE MOTOR RELAY COIL
- G92527t25: CHECK FUSE 36 OF THE PASSENGER COMPARTMENT FUSE BOX FOR A SHORT TO GROUND
- G92527t26: CHECK CONTINUITY OF THE THROTTLE MOTOR RELAY COIL
- G92527t27: CHECK CONTINUITY OF THE THROTTLE MOTOR RELAY GROUND CIRCUIT
- PINPOINT TEST G92527p5: DTC P1254, P1250
- Acceleration Control
- Removal And Installation
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
