Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Jaguar X-Type Base, 3.0 C, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.26 LBS. | 0.57 KG | R-134a | S | |||
| Automatic Transmission Fluid | 9.30 QTS. | 8.8 L | WSS-M2C922A1 | Filled-for-life and will not normally require to be topped up. | S | ||
| Brake Fluid | N/A | N/A | JAGUAR ITT Super DOT 4 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 1.30 QTS. | 1.23 L | M2C 192A Synthetic Gear Oil | Part No. JLM 20771. | S | ||
| Engine Coolant | 8.50 QTS. | 8.04 L | 50/50 mixture of water, JAGUAR Antifreeze/Coolant and Corrosion Inhibitor | Specification: WSS M97B44-D. Includes: reservoir and climate control. | S | ||
| Engine Oil | w/Filter | 6.10 QTS. | 5.77 L | API - SAE 5W-30 | API - SJ/EC and ILSAC GF-2. | S | |
| Fuel Tank | 18.40 GALS. | 69.65 L | S | ||||
| Manual Transmission Fluid | 1.85 QTS. | 1.75 L | WSD-M2C200C | S | |||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid DEXRON III | S | |||
| Transfer Case Fluid | Drain and Refill | 1.16 PTS. | 0.55 L | SAE 75W-140 Synthetic Gear Lubricant | S | ||
| Transfer Case Fluid | Initial Fill | 1.26 PTS. | 0.60 L | SAE 75W-140 Synthetic Gear Lubricant | S | ||
| Windshield Washer Fluid | w/Headlamp power wash | 6.30 QTS. | 5.96 L | Windscreen Washer Fluid and clean water | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
| Windshield Washer Fluid | w/o Headlamp power wash | 2.60 QTS. | 2.46 L | Windscreen Washer Fluid and clean water | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.