2000 Jaguar XJ8 BaseFACTORY OEM SERVICE PROCEDURE

XJ8 & XJR (With Remote Transmitter)

NOTE: Memory positions of driver's seat, steering column and/or outside mirrors can be changed without reprogramming remote transmitter. When making adjustments to driver's preferences, reset to same memory channel.
  1. Insert key into ignition switch. Adjust driver's seat, steering column and outside rearview mirrors to preferred positions. Push MEMORY button located next to window control panel on driver's door.
    2. NOTE: Driver's preference will only be memorized if key is in ignition switch and MEMORY button LED is illuminated. Any preferences previously set in memory will be erased when a new preference is entered.
  2. When MEMORY button is pressed the LED next to MEMORY button will illuminate for 4 seconds. To store first driver's preferences, push "1", "2" or "3" button. When button is pressed, LED will go out and a chime will sound indicating that setting procedure is completed.
  3. To set a second and third memory position, adjust seat, steering column and outside rearview mirrors to second or third preferred position. Push MEMORY button and press unused button within 4 seconds after LED illuminates.
  4. LED will go out and a chime will sound indicating that the driver's preferences have been set. Within 5 seconds, press any button on remote transmitter. LED next to MEMORY button will flash and a chime will sound confirming that transmitter is programed.
  5. When remote transmitter UNLOCK button is pressed, driver's preferred seat, steering column and mirror positions will be set. Previously set driver's preferences will be erased and new preferences will be set if setting procedure is repeated.
  6. To cancel remote transmitter memory setting, insert key into ignition switch. Press MEMORY button next to window control panel on driver's door. Press any button on remote transmitter 2 times before LED next to MEMORY button goes out. The LED will go out and 2 chimes will sound confirming cancellation of the remote transmitter programming.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.