Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1996 Jaguar XJSFACTORY OEM SERVICE PROCEDURE
Electrical Component Locator: Switches
SWITCHES
| Component | Component Location |
|---|---|
| Coolant Temperature Switch | On right front water manifold. |
| Coolant Temperature Switch | Under left side of dash, on hot water pipe. |
| Dual Pressure Cutout Switch | On right front side of condenser. |
| Idle Switch | On throttle body assembly. |
| Inertia Switch (Fuel-Cut) | Behind right kick panel. |
| Inhibitor Switch (A/T) | On shift lever bracket. |
| Kickdown Switch (A/T) | Behind accelerator pedal. |
| Oil Pressure Switch | On top rear of engine. |
| Parking Brake Switch | On parking brake lever bracket. |
| Park Micro Switch | In front of shift lever assembly. |
| Radiator Thermal Switch | On left front of engine, on water pump inlet. |
| Seat Belt Warning Switch | At base of driver's seat belt buckle. |
| Transmission Kickdown Switch (A/T) | Under accelerator pedal. |
| Transmission Rotary Switch | On left side of gearbox. |
| Stoplamp Switch | On brake pedal bracket. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.