Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Ensure power window fuse and all wiring harness connections are clean and tight. Connect a jumper wire between White/Blue and Brown/Blue wires of thermal circuit breaker.
Circuit breaker is located under right side of instrument panel. Turn ignition on. Operate either window switch. If window operates, replace circuit breaker and recheck window operation. If window does not operate, go to next step.
With ignition on, battery voltage should be present at Brown/Blue wire of left window switch. Operate left window switch. With left window switch operated in one direction. Battery voltage should be present at Red/Blue wire of left window switch.
With left window switch operated in opposite direction, battery voltage should be present at Green/Blue wire of left window switch. If voltage readings are not as specified, replace window switch.
Repeat steps 3) and 4) for right window switch. Measure voltage at Red/Green wire of right window switch for one direction and Green/Red wire for opposite direction.
If both window switches are okay, check window lift motor continuity. Continuity should exist between window motor connector terminals. Replace window motor as necessary.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Windows Inoperative