Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1988 Jaguar XJ6 BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.50 LBS. | 1.13 KG | R-12 | S | |||
| Automatic Transmission Fluid | Drain and Refill | 3.20 QTS. | 3.02 L | Automatic Transmission Fluid DEXRON IID | S | ||
| Automatic Transmission Fluid | Overhaul | 8.50 QTS. | 8.04 L | Automatic Transmission Fluid DEXRON IID | S | ||
| Brake Fluid | 0.51 QTS. | 0.48 L | S | ||||
| Differential Gear Oil | 2.20 QTS. | 2.08 L | Powr-Lok: API GL5, SAE 90. Top-up only if above oil not available: API GL5, SAE EP90. Normal Diff. API GL5, SAE EP90 | S | |||
| Engine Coolant | 9.70 QTS. | 9.17 L | Including Reservoir. 55% Concentrate - Use: Jaguar Anti-freeze & Summer Coolant. If not available use phosphate-free antifreeze conforming to spec. BS 3150 or 3152. (Plain water MUST NOT be used) | S | |||
| Engine Oil | w/Filter | 8.50 QTS. | 8.04 L | SAE 5W-20/30/40 (Below 14Deg.F), 10W-30/40 (-4Deg.F to 100Deg.F), 10W-50, 15W-40/50, 20W-40/50 (14Deg.F & Above). Use oil BLS.22.OL.07 or CCMC G3 or A.P.I. SE/SF. | S | ||
| Engine Oil | w/o Filter | 7.90 QTS. | 7.47 L | SAE 5W-20/30/40 (Below 14Deg.F), 10W-30/40 (-4Deg.F to 60Deg.F), 10W-50, 15W-40/50, 20W-40/50 (14Deg.F & Above). Use oil BLS.22.OL.07 or CCMC G3 or A.P.I. SE/SF. | S | ||
| Fuel Tank | 23.50 GALS. | 88.95 L | S | ||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
