1988 Jaguar XJ-SCFACTORY OEM SERVICE PROCEDURE

XJS THERMO Time Switch Test: Notes

  1. To test thermo time switch, determine temperature rating of switch. The switch is rated at 59°F (15°C) or 95°F (35°C). The rating is stamped on flat part of switch body.
  2. Measure coolant temperature. The test procedure to use depends on whether coolant temperature is above or below the rated value of switch.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.