2008 Isuzu Ascender LS, RWDFACTORY OEM SERVICE PROCEDURE

Wheel Alignment Specifications

Camber Cross Camber Left Caster Right Caster Cross Caster Thrust Angle Toe (Total) Steering Wheel Angle
Trailblazer, Envoy, Ranier w/out RPO G67
-0.50° ± 0.60° 0.00° ± 0.60° 3.90° ± 0.60° 4.10° ± 0.60° -0.20° ± 0.60° 0.00° ± 0.40° +0.10° ± 0.20° -0.50° ± 3.50°
Trailblazer, Envoy, Ranier with RPO G67
-0.50° ± 0.60° 0.00° ± 0.60° 4.15° ± 0.60° 4.35° ± 0.60° -0.20° ± 0.60° 0.00° ± 0.40° +0.10° ± 0.20° -0.50° ± 3.50°
TrailBlazer SS
-0.50° ± 0.60° 0.00° ± 0.60° 4.25° ± 0.60° 4.25° ± 0.60° 0.00° ± 0.60° 0.00° ± 0.40° +0.20° ± 0.20° -0.50° ± 3.50°
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.