Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Isuzu Ascender S, RWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/o Rear AC | 7.50 OZS. | 0.22 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/Rear A/C | 8.50 OZS. | 0.25 L | PAG 46 | S | ||
| Air Cond Refrigerant | 5 - Passenger | 1.90 LBS. | 0.86 KG | R-134a | S | ||
| Air Cond Refrigerant | 7- Passenger | 2.80 LBS. | 1.27 KG | R-134a | S | ||
| Automatic Transmission Fluid | 5.00 QTS. | 4.73 L | Automatic Transmission Fluid DEXRON III | With a G-License Number (G-34318). | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 4.2L Eng | Front | 1.70 PTS. | 0.8 L | SAE 75W-90 Synthetic Gear Oil | S | |
| Differential Gear Oil | 4.2L Eng | Rear | 3.60 PTS. | 1.7 L | SAE 75W-90 Synthetic Gear Oil | S | |
| Engine Coolant | 4.2L Eng | 5 - Passenger | 13.90 QTS. | 13.15 L | 50/50 mixture of DEX-COOL and drinkable water | S | |
| Engine Coolant | 4.2L Eng | 7- Passenger | 15.20 QTS. | 14.38 L | 50/50 mixture of DEX-COOL and drinkable water | S | |
| Engine Oil | 4.2L Eng | w/Filter | 7.00 QTS. | 6.62 L | API - SAE 5W-30 | S | |
| Fuel Tank | 5 - Passenger | 22.00 GALS. | 83.27 L | S | |||
| Fuel Tank | 7- Passenger | 25.30 GALS. | 95.77 L | S | |||
| Power Steering Fluid | N/A | N/A | ISUZU Power Steering Fluid | Part No. 2 90531 814 0. | S | ||
| Transfer Case Fluid | N/A | N/A | AUTO TRAK II Fluid | Part No. 8 12378 508 0. | S | ||
| Windshield Washer Fluid | N/A | N/A | Washer Solvent | Part No. 2 90531 811 0. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
