Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Isuzu Axiom Base, 4WDFACTORY OEM SERVICE PROCEDURE
Transmission Control System DTCS
TRANSMISSION CONTROL SYSTEM DIAGNOSTIC TROUBLE CODES (DTC) LIST
| DTC | DESCRIPTION |
|---|---|
| P0218 | Transmission Fluid Over Temperature |
| P0705 | Transmission Range Switch (Mode Switch) Illegal Position |
| P0706 | Transmission Range Switch (Mode Switch) Performance |
| P0711 | Transmission Fluid Temperature (TFT) Sensor Performance |
| P0712 | Transmission Fluid Temperature (TFT) Sensor Circuit Low Input |
| P0713 | Transmission Fluid Temperature (TFT) Sensor Circuit High Input |
| P0719 | Brake Switch Circuit Low (Stuck on) |
| P0722 | Automatic Transmission Output Speed Sensor (OSS) Low Input |
| P0723 | Automatic Transmission Output Speed Sensor (OSS) Intermittent |
| P0724 | Brake Switch Circuit High (Stuck OFF) |
| P0730 | Gear Error With out Input Speed |
| P0742 | Torque Converter Clutch (TCC) System Stuck ON |
| P0748 | Pressure Control Solenoid (PCS) (Force Motor) Circuit Electrical |
| P0751 | Shift Solenoid (A) Performance (Stuck OFF) |
| P0752 | Shift Solenoid (A) Performance (Stuck ON) |
| P0753 | Shift Solenoid (A) Electrical |
| P0756 | Shift Solenoid (B) Performance (Stuck OFF) |
| P0757 | Shift Solenoid (B) Performance (Stuck ON) |
| P0758 | Shift Solenoid (B) Electrical |
| P1850 | Brake Band Apply Solenoid Malfunction |
| P1860 | TCC Solenoid Electrical |
| P1870 | Transmission Component Slipping (TCC Stuck OFF) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.