Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Isuzu Rodeo S 4WD V6-3.2LFACTORY OEM SERVICE PROCEDURE
Keyless Entry Module: Service and Repair
Anti-Theft & Keyless Entry Controller
Removal
1. Disconnect the battery ground cable.
2. Remove the glove box from the instrument panel assembly (1).
- Refer to the Instrument Panel Assembly in Body Structure.
3. Remove the anti-theft & keyless entry controller (2).
- Disconnect the connector.
- Remove two fixing screws.
Installation
To install, follow the removal steps in the reverse order.
Anti-theft & Keyless Entry Control Unit Replacement
1. Remove and install the control unit.
- Refer to Anti-theft & Keyless Entry Control Unit Removal and Installation.
2. Register ID code.
- Refer to ID Code Registration
3. Check that the keyless entry system works normally.
Removal
1. Disconnect the battery ground cable.
2. Remove the glove box from the instrument panel assembly (1).
- Refer to the Instrument Panel Assembly in Body Structure.
3. Remove the anti-theft & keyless entry controller (2).
- Disconnect the connector.
- Remove two fixing screws.
Installation
To install, follow the removal steps in the reverse order.
Anti-theft & Keyless Entry Control Unit Replacement
1. Remove and install the control unit.
- Refer to Anti-theft & Keyless Entry Control Unit Removal and Installation.
2. Register ID code.
- Refer to ID Code Registration
3. Check that the keyless entry system works normally.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.