Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Isuzu Rodeo LS, 2.2 DFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.54 LBS. | 0.69 KG | R-134a | S | |||
| Automatic Transmission Fluid | 9.10 QTS. | 8.61 L | Automatic Transmission Fluid DEXRON III | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 2.2L Eng | Front | 1.10 QTS. | 1.04 L | SAE 80W-90 Gear Oil | S | |
| Differential Gear Oil | Rear | 1.87 QTS. | 1.76 L | SAE 80W-90 Gear Oil | S | ||
| Engine Coolant | 2.2L Eng,Automatic Trans | 7.40 QTS. | 7 L | 50/50 mixture of DEX-COOL and drinkable water | S | ||
| Engine Oil | 2.2L Eng | w/Filter | 4.80 QTS. | 4.54 L | API - SAE 10W-30 | API - SAE 10W-30 Above 0Deg.F (-18Deg.C) (Preferred). Below 0Deg.F (-18Deg.C), SAE 5W-30 viscosity oils may be required. | S |
| Engine Oil | 2.2L Eng | w/o Filter | 4.40 QTS. | 4.16 L | API - SAE 10W-30 | API - SAE 10W-30 Above 0Deg.F (-18Deg.C) (Preferred). Below 0Deg.F (-18Deg.C), SAE 5W-30 viscosity oils may be required. | S |
| Fuel Tank | 19.50 GALS. | 73.81 L | S | ||||
| Manual Transmission Fluid | 2.2L Eng | 2.13 QTS. | 2.01 L | Automatic Transmission Fluid DEXRON III | S | ||
| Power Steering Fluid | 1.10 QTS. | 1.04 L | Automatic Transmission Fluid DEXRON III | S | |||
| Transfer Case Fluid | 1.50 QTS. | 1.41 L | SAE 5W-30 | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.