2001 Isuzu Rodeo LS 2WD V6-3.2LFACTORY OEM SERVICE PROCEDURE

Cruise Control System Diagnostics

DIAGNOSIS
The Cruise Control System is controlled by the PCM as well as the engine and automatic transmission. DTC codes are stored in the PCM if troubles occur in the circuit. DTC codes categorized "type D"DTC Types are shown only by the Tech 2 scan tool.
Refer to Powertrain Management / Computers and Control Systems / System Diagnostics for entire DTC diagnosis.

NOTE: The DTCs are detected while the engine is running.






Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.