1999 Isuzu OasisFACTORY OEM SERVICE PROCEDURE

Passenger's Window Switch Test

Remove passenger's power window switch. See PASSENGER'S POWER WINDOW SWITCHΒ  under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See PASSENGER'S POWER WINDOW SWITCH TESTΒ  table.

Fig 1: Identifying Passenger's Power Window Switch Terminals
G98E03798Courtesy of ISUZU MOTOR CO.
PASSENGER'S POWER WINDOW SWITCH TEST

Switch Position Continuity Between Terminal Nos.
Off 2 & 3; 4 & 5
Up 1 & 4; 2 & 3
Down 1 & 3; 4 & 5
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.