1998 Isuzu Trooper LSFACTORY OEM SERVICE PROCEDURE

Trouble Shooting: Notes

NOTE: To verify ABS operation (normal or faulty), perform a system self-check. See ANTI-LOCK SYSTEM SELF-CHECK under DIAGNOSIS & TESTING.

The Anti-Lock Brake System (ABS) is capable of storing Diagnostic Trouble Codes (DTCs) when a system malfunction is detected. During a malfunction, ABS warning light may flash or remain illuminated. DTCs can be retrieved by observing ABS warning light, or by using a scan tool. See SELF-DIAGNOSTICS. If a DTC is not present, but a malfunction is evident, trouble shooting may be performed by symptom. See SYMPTOM DIAGNOSIS.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.