Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Passenger's Window Switch Test
Remove power window master switch. See MASTER POWER WINDOW SWITCHΒ under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See PASSENGER'S POWER WINDOW SWITCH TEST table.
| Switch Position | Pin Continuity | |
|---|---|---|
| Civic, Odyssey & Oasis | ||
| Off | 2 & 3; 4 & 5 | |
| Up | 1 & 4; 2 & 3 | |
| Down | 1 & 3; 4 & 5 | |
| CR-V | ||
| Off | 2 & 3; 4 & 5 | |
| Up | 1 & 4 | |
| Down | 1 & 3 | |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
