Wheel Alignment Specifications

1996 Isuzu Trooper S, AutomaticSECTION Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS

Application Preferred Range
Camber (1) 0 -0.5 To 0.5
Caster (1) (2-Door) 2 1.25 To 2.75
Caster (1) (4-Door) 2.17 1.42 To 2.92
Toe-In (2) 0 (0) -0.08 To 0.08 (-2 To 2)
Toe-In (1) 0 -0.16 To 0.16
Toe-Out On Turns (1)
Inner 34 -
Outer 32 -
(1) Measurement is in degrees.
(2) Measurement is in inches (mm).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.