1995 Isuzu Rodeo LS, RWDFACTORY OEM SERVICE PROCEDURE

Service Intervals & Specifications: Capacities

BATTERY SPECIFICATIONS

Application & Group CCA Rating
Rodeo (24/86) 600/430
FLUID CAPACITIES

Application Qts. (L)
Crankcase (Includes Filter) 4.4 (4.2)
Cooling System (Includes Heater) 9.5 (9.0)
Manual Transmission 2.4 (2.2)
Automatic Transmission (Dexron-II)
Dry Refill 9.1 (8.6)
Differential (2)
Front Axle 1.6 (1.5)
Rear Axle
Dana Type 1.9 (1.8)
Saginaw Type 2.0 (1.9)
Transfer Case (1) 1.5 (1.4)
(1) Use SAE 5W-30 SF engine oil with ambient temperatures less than 90°F (32°C) or SAE 40W with temperatures greater than 90°F (32°C).
(2) On standard differentials, use SAE 80W-90/API GL-5 gear oil. On limited slip differentials, use SAE 80W-90/API GL-5 gear oil rated for limited slip axles.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.