Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Isuzu Rodeo LS, 4WD, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.44 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | 3.2L Eng | 9.10 QTS. | 8.61 L | Automatic Transmission Fluid DEXRON II | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 3.2L Eng | Front | 1.60 QTS. | 1.51 L | SAE 80 or 80W-90 (Below 50Deg.F), 90W or 80W-90 (0Deg.F to 90Deg.F), 140 (Above 50Deg.F Consistently) | S | |
| Differential Gear Oil | 3.2L Eng | Rear | 1.87 QTS. | 1.76 L | SAE 80 or 80W-90 (Below 50Deg.F), 90W or 80W-90 (0Deg.F to 90Deg.F), 140 (Above 50Deg.F Consistently) | S | |
| Engine Coolant | 3.2L Eng | 9.30 QTS. | 8.8 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | S | ||
| Engine Oil | 3.2L Eng | w/Filter | 5.70 QTS. | 5.39 L | API - SAE 10W-30 | API - SAE 10W-30 Above 0Deg.F (-18Deg.C) (Preferred). Below 0Deg.F (-18Deg.C), SAE 5W-30 viscosity oils may be required. | S |
| Engine Oil | 3.2L Eng | w/o Filter | 5.00 QTS. | 4.73 L | API - SAE 10W-30 | API - SAE 10W-30 Above 0Deg.F (-18Deg.C) (Preferred). Below 0Deg.F (-18Deg.C), SAE 5W-30 viscosity oils may be required. | S |
| Fuel Tank | 21.90 GALS. | 82.9 L | S | ||||
| Manual Transmission Fluid | 3.2L Eng | 3.10 QTS. | 2.93 L | Use SAE 15W-40, 20W-40 or 20W-50 for areas with temperatures of 90Deg F (32Deg C) and higher. For other areas use SAE 5W-30 | S | ||
| Transfer Case Fluid | 3.2L Eng | 1.50 QTS. | 1.41 L | Use SAE 15W-40, 20W-40 or 20W-50 for areas with temperatures of 90Deg F (32Deg C) and higher. For other areas use SAE 5W-30 | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.