Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Isuzu Stylus AutomaticFACTORY OEM SERVICE PROCEDURE
Trouble Code Identification
TROUBLE CODE IDENTIFICATION
| Code | System Affected | Probable Cause | ||||
|---|---|---|---|---|---|---|
| 12 | System Normal | System Normal | ||||
| 13 (SOHC) | O2 Sensor (Open/Shorted) | Sensor or Circuit, ECM | ||||
| 13 (DOHC) | O2 Sensor (Open/Shorted) | Sensor or Circuit, ECM | ||||
| 14A (1) | Coolant Temp. Sensor | Sensor or Circuit, ECM | ||||
| 14B (2) | Coolant Temp. Sensor | Sensor or Circuit, ECM | ||||
| 21A | TPS Signal (High) | Sensor or Circuit, ECM | ||||
| 21B | TPS Signal (Low) | Sensor or Circuit, ECM | ||||
| 23A (2) | MAT Sensor (Low) | Sensor or Circuit, ECM | ||||
| 23B (1) | MAT Sensor (High) | Sensor or Circuit, ECM | ||||
| 24 | Vehicle Speed Sensor | Sensor or Circuit, ECM | ||||
| 32 | EGR Control Solenoid | EGR Valve, Sensor or Ckt, ECM | ||||
| 33A | MAP Sensor (High) | Sensor or Circuit, ECM | ||||
| 33B | MAP Sensor (Low) | Sensor or Circuit, ECM | ||||
| 42 | Elec. Spark Timing | Circuit, Ign. Module, ECM | ||||
| 44 (SOHC) | O2 Sensor (Lean) | Injectors, Fuel Pressure, Exhaust Leaks, O2 Sensor or Circuit, ECM | ||||
| 44 (DOHC) | O2 Sensor (Lean) | Injectors, Fuel Pressure, Exhaust Leaks, O2 Sensor or Circuit, ECM | ||||
| 45 (SOHC) | O2 Sensor (Rich) | Injectors, Fuel Pressure, EGR, O2 Sensor or Circuit, MAP Sensor, TPS, Canister Purge Ignition Shielding, ECM | ||||
| 45 (DOHC) | O2 Sensor (Rich) | Injectors, Fuel Pressure, EGR, O2 Sensor or Circuit, MAP Sensor, TPS, Canister Purge Ignition Shielding, ECM | ||||
| 51 | ECM/MEM-CAL Failure | ECM, EEPROM or MEM-CAL Failure | ||||
|
||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.