Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1992 Isuzu Rodeo LS, 4WD, Standard
Quick Lookups: Fluids
1992 Isuzu Rodeo LS, 4WD, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.19 LBS. | 0.99 KG | R-12 | S | |||
| Automatic Transmission Fluid | 9.30 QTS. | 8.8 L | Automatic Transmission Fluid DEXRON II | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill to "max" line on the reservoir. | S | ||
| Differential Gear Oil | 3.1L Eng | Front | 1.60 QTS. | 1.51 L | SAE 80 or 80W-90 (Below 50Deg.F), 90W or 80W-90 (0Deg.F to 90Deg.F), 140 (Above 50Deg.F Consistently) | S | |
| Differential Gear Oil | 3.1L Eng | Rear | 1.95 QTS. | 1.84 L | SAE 80 or 80W-90 (Below 50Deg.F), 90W or 80W-90 (0Deg.F to 90Deg.F), 140 (Above 50Deg.F Consistently) | S | |
| Engine Coolant | 3.1L Eng | 11.40 QTS. | 10.78 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | S | ||
| Engine Oil | 3.1L Eng | w/Filter | 4.50 QTS. | 4.25 L | API - SAE 5W-20 (Below 20Deg.F), 5W-30 (Below 60Deg.F), 10W-30 (Above 0Deg.F), 20W-20/40 (Above 20Deg.F), 30 (Above 40Deg.F) | S | |
| Engine Oil | 3.1L Eng | w/o Filter | 4.00 QTS. | 3.78 L | API - SAE 5W-20 (Below 20Deg.F), 5W-30 (Below 60Deg.F), 10W-30 (Above 0Deg.F), 20W-20/40 (Above 20Deg.F), 30 (Above 40Deg.F) | S | |
| Fuel Tank | 21.90 GALS. | 82.9 L | S | ||||
| Manual Transmission Fluid | 3.1L Eng | 2.20 QTS. | 2.08 L | Areas with temperatures of (90Deg.F and higher) SAE 40. Other areas SAE 5W-30 SF | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON or DEXRON II | S | |||
| Transfer Case Fluid | 3.1L Eng | 1.50 QTS. | 1.41 L | Areas with temperatures of (90Deg.F and higher) SAE 40. Other areas, API - SF, SAE 5W-30 | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.