2025 Infiniti QX80 AutographFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.10 OZS. 0.15 L ND-OIL 12 PAG S
Air Cond Refrigerant w/Cool Box 2.43 LBS. 1.1 KG HFO-1234yf (R-1234yf) For further details see "Air conditioner specification label". S
Air Cond Refrigerant w/o Cool Box 2.32 LBS. 1.05 KG HFO-1234yf (R-1234yf) For further details see "Air conditioner specification label". S
Automatic Transmission Fluid 10.63 QTS. 10.05 L NISSAN Automatic Transmission Fluid Matic P S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 S
Differential Gear Oil Front 0.88 QTS. 0.83 L Genuine NISSAN Hypoid Differential Oil Hypoid Super GL-5 80W-90 or equivalent conventional (non-synthetic ) oil. S
Differential Gear Oil Rear 2.13 QTS. 2.01 L Genuine NISSAN Hypoid Fluid - S1 GL-5 SAE 75W-80 Synthetic or equivalent S
Engine Coolant w/Reservoir 13.75 QTS. 13.01 L Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent S
Engine Oil Drain and Refill,w/Filter 6.40 QTS. 6.05 L API - SAE 0W-20 SP If SAE 0W-20 SP is not availalble, a synthetic SAE 0W-20 SP GF-6A motor oil (or engine oil) may be used. S
Engine Oil Drain and Refill,w/o Filter 5.90 QTS. 5.58 L API - SAE 0W-20 SP If SAE 0W-20 SP is not availalble, a synthetic SAE 0W-20 SP GF-6A motor oil (or engine oil) may be used. S
Fuel Tank 23.63 GALS. 89.44 L S
Transfer Case Fluid 1.88 QTS. 1.77 L Genuine NISSAN Transfer Case Fluid LV or equivalent Approximate capacity. S
Windshield Washer Fluid N/A N/A Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.