Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2024 Infiniti QX55 EssentialFACTORY OEM SERVICE PROCEDURE
Removal and Installation
CAUTION:
- Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING". Refer to Description .
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING". Refer to Description .
REMOVAL
- Remove battery tray. Refer to Removal and Installation .
- Disconnect the harness connectors from the ECM, TCM, electric intake valve timing control module, and VCR control module. Refer to Harness Connector (lever locking type).
- Remove module assembly bracket bolts.
- Remove electric intake valve timing control module nuts.
- Remove electric intake valve timing control module.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING". Refer to Description .
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING". Refer to Description .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.