2024 Infiniti QX55 EssentialFACTORY OEM SERVICE PROCEDURE

Component Location

GNSDB140255Courtesy of NISSAN NORTH AMERICA, INC.
A. View of instrument panel B. Front view of fuse block (J/B)[view with fuse block (J/B) removed]
C. Rear view of fuse block (J/B)[view with fuse block (J/B) removed]  
No. Component Function
1. Rear door switch RH Transmits the door switch signal to the BCM. Refer to Rear Door Switch for detailed component location.
2. Rear door handle assembly RH (request switch) Transmits the request switch signal to the BCM. Refer to Rear Door Request Switch for detailed component location.
3. Front door handle assembly RH (request switch) Transmits the request switch signal to the BCM. Refer to Front Door Request Switch RH for detailed component location.
4. Front door switch RH Transmits the door switch signal to the BCM. Refer to Front Door Switch for detailed component location.
5. Transmission range switch Transmits the transmission range switch signal to the BCM. Refer to Transmission Range Switch for detailed component location.
6. IPDM E/R (Intelligent Power Distribution Module Engine Room)
  • IPDM E/R detects push-button ignition switch status, and transmits the push-button ignition switch status signal (CAN) to the BCM.
  • IPDM E/R receives the ignition relay-1 (IPDM E/R) control signal and push-button ignition switch ON signal (CAN) from the BCM, and controls the ignition relay-1.
Refer to System Description .
7. Stop lamp switch Transmits the stop lamp switch signal to the BCM. Refer to Stop Lamp Switch for detailed component location.
8. Electric shift control module Transmits the park position signal to the BCM. Refer to Electric Shift Control Module for detailed component location.
9. BCM (Body Control Module)
  • BCM controls the power distribution system.
  • BCM judges the push-button ignition switch status and vehicle condition.
  • BCM checks the push-button ignition switch status internally.
Refer to System Description .
10. Front door switch LH Transmits the door switch signal to the BCM. Refer to Front Door Switch for detailed component location.
11. Front door handle assembly LH (request switch) Transmits the request switch signal to the BCM. Refer to Front Door Request Switch LH for detailed component location.
12. Rear door switch LH Transmits the door switch signal to the BCM. Refer to Rear Door Switch for detailed component location.
13. Rear door handle assembly LH (request switch) Transmits the request switch signal to the BCM. Refer to Rear Door Request Switch for detailed component location.
14. Push-button ignition switch Refer to Push-Button Ignition Switch .
15. Accessory relay-1 [in fuse block (J/B)]
  • Accessory relay-1 is controlled by the BCM.
  • Accessory relay-1 supplies accessory power supply or push-button ignition switch ON signal to each ECU when the push-button ignition switch is ON.
  • BCM compares the status of accessory relay-1 control signal, and push-button ignition switch status judged by the BCM.
16. Ignition relay-2 [in fuse block (J/B)]
  • Ignition relay-2 is controlled by the BCM.
  • Ignition relay-2 supplies ignition ON power supply or push-button ignition switch ON signal to each ECU and system when the push-button ignition switch is ON.
  • BCM compares the status of ignition relay-2 control signal and push-button ignition switch status judged by the BCM.
  • BCM monitors the ignition relay-2 operating status by the ignition relay-2 feedback signal.
17. Front blower motor relay [in fuse block (J/B)]
  • Front blower motor relay is controlled by the BCM.
  • Front blower motor relay supplies push-button ignition switch ON power supply or push-button ignition switch ON signal to the air conditioning system when the push-button ignition switch is ON.
  • BCM compares the status of the front blower motor relay control signal and push-button ignition switch status judged by the BCM.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.